The products we have developed
are based on the strategy of IHP regarding our short and medium
term activity which comprises three directions of activity:
- applied research and technological development
- engineering
- innovation
The above
mentioned directions are meant to align the themes promoted by
IHP to the EU research themes and particularly to the requirements
on behalf the economic units inside the country. To this purpose,
our research themes and projects in addition to their technical
and technological impact have also a social-economical one.
2.
Hydraulic, pneumatic and lubrication general use installations and
electronic control systems
Hydro
assembly speed regulator
Electronic
control units
Stand control board
3.
Equipments used in recycling of waste material and environmental
protection, machineries for irrigation and equipments for power
plants
Metal chips compaction machine
Package compaction press
Electro-hydraulic system for the adjustment of irrigation
rate
4.
Test stands
Test
stand for servo valves
Test
stand for heating systems
Test stand for pneumatic directional control valves
inside the brakes of railway wagons
Test
stand for hydraulic dampers
Non-conventional
nautical propulsion system
5.
Products designed and developed by IHP
for which we are looking for partners in execution and beneficiaries
as well
a.
Waste compaction and packaging presses
Technical
features:
- maximum force
60 [kN]
-
pack sizes
500 x 500
x 400 [mm]
-
pack maximum mass
15 [kg] PET
or 28 [kg] of paper
-
compaction time
33 [s]
-
compaction chamber sizes
450 x 450
x 840 [mm]
-
supply voltage
220 [Vac]
-
maximum weight
450 [kg]
-
overall dimensions (L x W x H)
720 x 840 x
2130 [mm]
Fields
to be used in include preserving urban areas
against pollution caused by paper and card waste or PET packages.
b.
Equipments to control access to institutions and parking places
Hydraulic
remote controlled pillar for access control
The
hydraulic remote controlled pillar is used to control access to
a supervised area. To mount it, the pillar is placed 1[m] beneath
ground. It is operated electro-hydraulically, by a radio remote
or by pushing some buttons from inside the cabin of the operator.
It is supplied from a 220 [Vac] electrical network.
Electro-hydraulic
remote controlled barrier
The
electro-hydraulic barrier is provided with an electronic module
for controlling the hydraulic actuating parts. The barrier can
be operated by a radio remote or by pushing some buttons from
inside the cabin of the operator. The maximum arm of the barrier
is 3 [m]. The barrier is supplied from a 220 [Vac] electrical
network.
c.
Flowmeter for automobiles
Technical
features:
Minimum
working flow
0.08
[l/min]
Maximum
working flow
0.5 [l/min]
Working
fluid :
-
petrol
= 0.5 [cP]
- Diesel oil
=
1.2 - 1.7 [°E] at (20°C)
Maximum
pressure
10 [bar]
Drop
pressure
p
= 0.05...1.3 [bar]
Fitting
rated diameter
rD = 6 [mm]
Nozzle
diameter
d = 1 [mm]
Input
temperatures
T = +5...+35
[°C]
Measurement
error
e = 1 [%]
Resolution
R = ±
1 [impulse/sec]
Supply
voltage
Vs = 12 ...
24[Vdc]
d.
Elevation platform for locomotory disabled persons
The
platform is useful for locomotory disabled persons; its
maximum elevation height is 1.4[m]. The platform is operated
electro-hydraulically, by means of its own pumping aggregate
and electric control module. The platform is provided
with protective elements (front barrier and side bars)
for the person being carried. The maximum lifted load
is 250[kg].
e.
Electromagnetic pump for fluid decantation
Technical
features:
-
working flow
0.5...1,5 [l/h]
-
working frequency
5...20 [Hz]
-
supply voltage
12...24 [Vdc]
-
maximum power
5
[W]
-
suction lift
1
[m]
-
pump lift
2
[m]
This product can be used in vehicle heating
systems, for fluid decanting or in dosing systems for low-viscosity
and low-flow fluids.
f.
All purpose hydraulic equipment used in case of accidents and disasters
Technical
features:
-
maximum pressure
720 [bar]
-
supply pressure
172 [bar]
-
maximum working flow
5 [l/min]
-
maximum forces generated
206 [KN] -
shears
34 [KN] - spacing
tool
35 [KN] - distancing
tool
- net weight
5.9 [kg] -
shears
6.2 [kg] -
spacing tool
4.8 [kg] -
distancing tool
-
maximum spans
80 [mm] - shears
150 [mm] -
spacing tool
290 [mm] -
distancing tool
This equipment can be used for extrication
purposes, in case of accidents and disasters, by the operative
squads. In order to operate, the device is coupled to a hydraulic
pressure unit. The kit comprises three different devices, which
are interchangable by hand screwing up: the shears, the spacing
tool, the distancing
tool.
= 0.5 [cP]
=
1.2 - 1.7 [°E] at (20°C) 
p
= 0.05...1.3 [bar]
