Working pressure:
160 bar
Piston dyameter: 80 mm
Rod dyameter: 36 mm
Fast stroke: 150 mm
Transition stroke: 20 mm
Low stroke (technological feed – pressing): 50 mm
Fast stroke control: 110-150 mm
Sizes: 108x108x516mm
Electromagnetic
control flow divider
Technical
features:
Voltage
supply 24 Vcc
Frequency supply 2…15 Hz adjustable manually
Max.power 22 W
Max.pressure of the discharged flows 1 bar
Aspired flow o,188 l/min at a frequency of 2 Hz
1,413 l/min at a frequency of 15 Hz
Partition error 1%
Electro
pneumatic jack
The electro pneumatic
jack offers the following advantages:
- it reunites two functions in a single product
- it totally eliminates physical human effort when operating
it
- it has a compact and robust structure
- it has very small gauge sizes ( ? exterior x hight = ? 145
x 105, when packed)
- low maintenance and repair costs
Technical
features:
- medium swept volume = 1.4 cm3 / stroke
- maximum pressure = 2.5 atm.
- lifting stroke = 100 mm
- lifting time ~ 40 sec.
- maximum load = 200 daN
- supply voltage = 24 Vdc
Waste compaction and packaging press
Technical
features:
Maximum force
60 [kN]
Pack
sizes
500 x 500 x 400 [mm]
Pack
maximum mass
15
[kg] PET or 28 [kg] paper
Compaction
time
33 [s]
Compaction
chamber size
450 x 450 x 840 [mm]
Maximum
power
1,5 [kW]
Supply
voltage
220 [Vca] / 5 0 [Hz]
Overall
dimensions
720 x 840 x 2130 [mm]
Maximum
weight
450 [kg]
Emplacement
1 x 1 [m²]
Fields
to be used in include preserving urban
areas against pollution caused by paper and card wastes,
PET packages, waste aluminum or plastic.
Elevation platform for the locomotory disabled
The platform is useful for locomotory disabled persons;
its maximum elevation height is 1.4[m]. The platform is
operated electro-hydraulically, by means of its own pumping
aggregate and electric control module. The platform is provided
with protective elements (front barrier and side bars) for
the person being carried. The maximum lifted load is 250[kg].
Hydraulic
distancing
cylinder
Technical
features:
Maximum
working pressure
720
[bar]
Maximum
displacement force
165
[kN]
Maximum
stroke
250 [mm]
Net
weight
11.5 [kg]
The
hydraulic distancing cylinder
is a portable
hydraulic device which is coupled to a high pressure hydraulic unit by
means of two flexible nozzles; it is used to open wide
metal profiles in building
structures, in order to enlarge the breaches
made to rescue the persons in case of accidents or natural disasters.
All
purpose hydraulic shears
Technical
features:
Maximum
working pressure
500
[bar]
Cutting
force
70 [kN]
Maximum
span at heads
90 [mm]
Overall
dimensions (L x W x H)
540 x 212 x 280 [mm]
Net
weight
13
[kg]
The
all purpose hydraulic shears are used in fast interventions such as in
fires, accidents, disasters and natural calamities. The
shears can cut through metal (profiles,
metal straps and sheets) in order to unblock and rescue
the persons trapped inside buildings, metal structures, means of transportation
which have been damaged or from other dangerous places.
Mixed
hydraulic tool
Technical
features:
Maximum
working pressure
500
[bar]
Cutting
force
65 [kN]
Spacing
force
at heads
28 [kN]
Maximum
span at heads
160
[mm]
Times
to actuate the handle for a maximum span
25
Net
weight
18
[kg]
The
mixed hydraulic tool is a hydraulically driven device, equipped with an
integrated manual pump, which can perform cutting and sectioning as well
as spacing and
enlarging operations between distorted metal
sections, and also extrication.
Hydraulic cutting tool for damaged car pedals
Technical
features:
Maximum
working pressure
720 [bar]
Rated
driving force
20 [kN]
Maximum
span
40 [mm]
Net
weight
4
[kg]
This
hydraulic cutting tool
is a portable device which is coupled by means of two flexible
sleeves to a high pressure unit. This device can be used to cut the pedals
of damaged cars.
Electromagnetic
fuel pump
Technical features:
Flow
(depending on the control frequency)
0.5...1.5 [l / h]
Working
frequency
5...20 [Hz]
Supply
voltage
12...24 [Vdc]
Maximum
power
5
[W]
Suction
lift
1 [m]
Pump
lift
2 [m]
The
electromagnetic pump can be used in vehicle heating systems, for fluid
decanting or in dosing systems for low-viscosity and low-flow fluids.
Radial
piston high pressure pump
Technical features:
Geometrical
volume (swept volume)
1.2
[cm³/rev]
Rated
speed
1500 [rev/min]
Rated
flow
1.68 [l/min]
Rated
pressure
450 or 650 [bar]
Rated
torque
1.2 or 1.6 [daN•m]
Maximum
temperature of the hydraulic working place
80 [°C]
The
radial piston pump is used within hydraulic installations of high force
fixed or mobile technological equipment, supplying hydraulic installations
with oil under high pressure. We have develop the prototype of this pump.
Proportional
directional control valve with on-board
electronic control unit
Technical
features:
Rated
size
10
[mm]
Rated
pressure
210
[bar]
Rated
flow
60 [l / min]
Supply
voltage
24 [Vdc]
Control
current
200 - 800 [mA]
Hysterezis
10 [%]
The
hydraulic directional control valve is used within electro hydraulic driving
equipments and installations for automated systems.
Electro-hydraulic
system for the adjustment of irrigation rate
Technical
features:
Maximum
working pressure of the installation
3 [bar]
Watering
rate, adjustable
200...600 [m³/ha]
Width
of the irrigated band
45 [m]
Length
of the irrigation plot
306 [m]
Exterior
diameter of the flexible tube
ø110
[mm] x 8 [mm]
Sprinkler height
1200 - 2000 [mm]
Driving
device for the butterfly valve
differential hydraulic cylinder with LVDT transducer
Control
mechanism of the hydraulic driving cylinder for the butterfly valve
three 24 [Vdc] electro valves
Control
mechanism of the automatic shutdown valve
a
24 [Vdc] electro valve
Sensing
and calculation of the rolling speed of the hose
proximity
sensor and micro controller
Data displayed
on front board
- rolling speed of the hose in [m/h]
- supply flow in [m³/h]
Available
controls on front board
- watering program selection
- shutdown in case
of a damage
- rolling/unrolling
the hose
- system reset
The
electro-hydraulic system is used for irrigation
installations equipped with drum and hose, to irrigate crops in fields,
in sprinkle irrigation plots or agricultural plots which have local water
resources.
Mobile
case for tests upon hydraulic devices
Technical features:
Viscosity
of additived hydraulic oil
10...30 [cSt] at 50 [°C]
Filtration
fineness
<=
15 [µm]
Operating
temperature
20...50 [°C]
Pressure
transducer
160 [bar]
Pressure
manometer
160 [bar]
Tank
manometer
60 [bar]
Flow
transducer
2...20 [l / min]
Supply
voltage
220
[Vac] / 50 [Hz]
The
mobile case for tests is used in fast interventions on operating machines.
In order to work, the kit is coupled to a hydraulic pressure unit.
System
and devices for tests at low pressure upon heating equipments
Technical
features:
Test
pressures
15...25
[bar]
Resistant
heating power
3.3 [kW]
Flow
of the electro pump
18
[l / min]
Motor
of the electro pump
3.3 [kW]
Supply
voltage
380 [Vac] / 50 [Hz]
The
system is used before delivery to the customer or even during the warranty
and post-warranty period to test heating equipments.
Differential
pressure
transducer with on-board electronic components
Technical features:
Type
of transducer
inductive
Maximum
operating pressure
300
[bar]
Measurement
range
±
20 [bar], ± 100 [bar], ± 300[bar]
Linearity
1
[%] over the entire range
Supply
voltage
22...
28 [Vdc]
Operating
temperature
-20...+100
[°C]
Output
±
10[V] or 4...20 [mA]
The
transducer is used to measure the difference in pressure on hydraulic
and pneumatic cylinders and servo cylinders or to measure the pressure
drop on hydraulic and pneumatic parts.
Pressure transducer with on-board electronic components
Technical
features:
Type
of transducer
inductive
Measurement
range
0...200 [bar]
Linearity
1 [%] over the entire range
Supply
voltage
±
15 [Vdc]
Output
0...10 [Vdc]
The
transducer can be used to measure the pressure in industrial hydraulic
systems.
Hydraulic remote controlled pillar
Technical
features:
Ascending
time
10[s]
Piston
diameter
40 [mm]
Piston
stroke
50 [mm]
Working
surface area
12.56
[square cm]
EA
411 electric motor,
with the following characteristics:
- installed power
500 [W]
- supply
voltage
12 [Vdc]
- revolution
3000 [rev/min]
PRD 1-212
hydraulic pump, with
the following characteristics:
- cubic
capacity
1.25 [cubic cm/rev]
- flow
3.75 [l/min]
- working
pressure
8 [bar]
The
hydraulic remote controlled pillar is used to control access to a supervised
area. To mount it, the pillar is placed 1[m] beneath ground. It is operated
electro-hydraulically, by a radio remote or by pushing some buttons from
inside the cabin of the operator. It is supplied from a 220 [Vac] electrical
network.
Electro-hydraulic remote controlled barrier
Technical
features:
Lifting
time of the barrier arm
4[s]
SAMT
24 FF 165-2 electric motor,
with the following characteristics:
- installed power
1 [kW]
- supply
voltage
220[V]
- revolution
3000 [rev/min]
PRD 1-212
hydraulic pump,
with the following characteristics:
- cubic
capacity
1.25 [cubic cm/rev]
- flow
3.75 [l/min]
- working
pressure
50 [bar]
CH16U-63/28-78.2
I.M-3.0 hydraulic cylinder,
with the following characteristics:
- cylinder
inner diameter
63 [mm]
- rod diameter
28 [mm]
- stroke
78 [mm]
- area
of the hydraulic cylider
25 [square cm]
The
electro-hydraulic barrier is provided with an electronic module for controlling
the hydraulic actuating parts. The barrier can be operated by a radio
remote or by pushing some buttons from inside the cabin of the operator.
The maximum arm of the barrier is 3 [m]. The barrier is supplied from
a 220 [Vac] electrical network.
